rusjae.blogg.se

Adafruit trinket multithread
Adafruit trinket multithread












  • On the board are two LEDs: green for power, and red for the user, connected to pin 1.
  • Power supply from USB port or external power source with automatic switching system.
  • Installed voltage regulators of 5.0 V and 3.3 V with current delivery up to 150 mA, allow to connect the supply voltage up to 16 V.
  • adafruit trinket multithread

  • Mini-usb connector for programming, in our assortment you will find the necessary wire.
  • USB bootloader with the possibility of programming via AVRdude or via Arduino IDE.
  • Clock Frequency: internal 8 MHz with the possibility to set 16 MHz for 5 V version.
  • Flash memory: 8 kb (2.75 kb of which is occupied by the bootloader).
  • The board is working with Windows and Mac OS, at the moment, there are no drivers for Linux.
  • Computers equipped with USB 3.0 ports can have a problem with the recognition of the Trinket bootloader, the solution to this situation is to use an external USB 2.0 hub.
  • Trinket has no serial port and the serial monitor embedded in the environment of Arduino, will not work.
  • The device can be programmed via the Arduino environment, however, due to the small size of the board, there are some differences: The 3.3 V version runs at a frequency of 8 MHz, 5.0 V and works with 8 MHz and 16 MHz.Ĭheck how to program the Adafruit Trinket using the Arduino IDE or AVRdude! Both modules work in the same way, differing only in the operating voltage of the logic leads and maximum clock frequency. In our offer, you will find two versions of the Adafruit Trinket - 3.3 Vand 5.0 V.

    adafruit trinket multithread

  • iNode - sensors and modules Bluetooth Android.
  • Components for 3D printers construction.
  • Laser cutting machines - engravers, plotters.













  • Adafruit trinket multithread